You are here
:Home > GO SHOPPING > 1/2" - 1" - 2" - 4" - 6" Deep Pleated Filters > Air Filter - 1/2 Inch

NOTE: DUE TO A REDUCED WORKFORCE BECAUSE OF THE VIRUS AND BECAUSE 1/2 INCH FILTERS HAVE TO BE CUSTOM MADE, WE ASK FOR YOUR PATIENCE. THERE IS ABOUT A ONE WEEK LEAD TIME ON THESE FILTERS.


1/2 INCH DEEP AIR FILTER

ONLINE SINCE 1995 - BEFORE GOOGLE WAS BORN
Since 1995 means you can trust our Website, trust our Quality, trust our Honesty, trust our Service

FREE DELIVERY TO YOUR HOME OR OFFICE

WE BEAT ANY PRICE, INSTANTLY!
See How Easy It Is


DON'T SEE YOUR SIZE, DON'T DESPAIR - WE CUSTOM MAKE ANY SIZE

How often should a one half inch (1/2") filter be changed?.....There are many variables that go into answering that question. Most important is how often you run your system, how dusty your neighborhood
is, the size of the duct system, the size of your home, etc, etc.....

Let's face it, no one is going to sit there and figure out all those variables, so the most logical answer is "look at your filter after a couple months and use your judgement. If you want a rule of thumb, then I would say every three months.

Air Filter Particulate Removal Efficiency Rating:
MERV-8: GOOD
MERV-11: BETTER

MERV-13: EXCELLENT

ODOR DEFENSE: Removes Toxic
Gases From The Air In Your Home
Plus Microscopic
Particulates

Top Of The Line Filters....
Even The MERV 8 has the latest "State Of The Art" design, like:
  • Layered Filtering Media Design To Capture Much More Dust, Pollutants, and Contaminants Than Other Filters. Varying Density Traps Larger Particles First, and Progressively Traps The Smaller Particles.
  • Better Quality - 30 Gauge Galvanized Expanded Metal Grid.
  • Moisture Resistance 28 Point Beverage Board Frame.
  • Filtering Media 100% Bonded To Frame.
  • 180 Fahrenheit Degrees Continuous Service, Peaks 225 Fahrenheit Degrees.
  • Resist Moisture To 100% RH.
  • Tested Under The Guidelines of The American Society of Heating, Refrigerating, And Air Conditioning Engineers.
  • 1/2 Inch Furnace Filters MERV 11


    NOTE: We know of no other company that makes 1/2" high quality pleated filters. If you find another website, it is probably one of our websites.


    1/2 INCH FURNACE FILTER - MERV 11

    ONLINE SINCE 1995 - BEFORE GOOGLE WAS BORN

    WHY PAY MORE? WE BEAT ANY PRICE, INSTANTLY! See How Easy It Is

    DON'T SEE YOUR SIZE, DON'T DESPAIR - WE CUSTOM MAKE ANY SIZE

    How often should a one half inch (1/2") filter be changed?.....There are many variables that go into answering that question. Most important is how often you run your system, how dusty your neighborhood
    is, the size of the duct system, the size of your home, etc, etc.....

    Let's face it, no one is going to sit there and figure out all those variables, so the most logical answer is "look at your filter after a couple months and use your judgement. If you want a rule of thumb, then I would say every three months.

    FREE DELIVERY TO YOUR HOME OR OFFICE
  • 1/2 Inch Furnace Filters MERV 13


    NOTE: DUE TO A REDUCED WORKFORCE BECAUSE OF THE VIRUS AND BECAUSE 1/2 INCH FILTERS HAVE TO BE CUSTOM MADE, WE ASK FOR YOUR PATIENCE. THERE IS ABOUT A ONE WEEK LEAD TIME ON THESE FILTERS.


    NOTE: We know of no other company that makes 1/2" high quality pleated filters. If you find another website, it is probably one of our websites.


    1/2 INCH FURNACE FILTER - MERV 13

    ONLINE SINCE 1995 - BEFORE GOOGLE WAS BORN

    WHY PAY MORE? WE BEAT ANY PRICE, INSTANTLY! See How Easy It Is

    DON'T SEE YOUR SIZE, DON'T DESPAIR - WE CUSTOM MAKE ANY SIZE

    How often should a one half inch (1/2") filter be changed?.....There are many variables that go into answering that question. Most important is how often you run your system, how dusty your neighborhood
    is, the size of the duct system, the size of your home, etc, etc.....

    Let's face it, no one is going to sit there and figure out all those variables, so the most logical answer is "look at your filter after a couple months and use your judgement. If you want a rule of thumb, then I would say every three months.

    FREE DELIVERY TO YOUR HOME OR OFFICE
  • 1/2 Inch Furnace Filters MERV 6



    NOTE: DUE TO A REDUCED WORKFORCE BECAUSE OF THE VIRUS AND BECAUSE 1/2 INCH FILTERS HAVE TO BE CUSTOM MADE, WE ASK FOR YOUR PATIENCE. THERE IS A ONE TO TWO WEEKS LEAD TIME ON THESE FILTERS.

    NOTE: We know of no other company that makes 1/2" high quality pleated filters. If you find another website, it is probably one of our websites.


    1/2 INCH FURNACE FILTER

    ONLINE SINCE 1995 - BEFORE GOOGLE WAS BORN

    WHY PAY MORE? WE BEAT ANY PRICE, INSTANTLY! See How Easy It Is


    FREE DELIVERY TO YOUR HOME OR OFFICE
  • 1/2 Inch Furnace Filters MERV 8


    NOTE: DUE TO A REDUCED WORKFORCE BECAUSE OF THE VIRUS AND BECAUSE 1/2 INCH FILTERS HAVE TO BE CUSTOM MADE, WE ASK FOR YOUR PATIENCE. THERE IS ABOUT A ONE WEEK LEAD TIME ON THESE FILTERS.


    NOTE: We know of no other company that makes 1/2" high quality pleated filters. If you find another website, it is probably one of our websites.


    1/2 INCH FURNACE FILTER

    ONLINE SINCE 1995 - BEFORE GOOGLE WAS BORN

    WHY PAY MORE? WE BEAT ANY PRICE, INSTANTLY! See How Easy It Is

    DON'T SEE YOUR SIZE, DON'T DESPAIR - WE CUSTOM MAKE ANY SIZE

    How often should a one half inch (1/2") filter be changed?.....There are many variables that go into answering that question. Most important is how often you run your system, how dusty your neighborhood
    is, the size of the duct system, the size of your home, etc, etc.....

    Let's face it, no one is going to sit there and figure out all those variables, so the most logical answer is "look at your filter after a couple months and use your judgement. If you want a rule of thumb, then I would say every three months.

    FREE DELIVERY TO YOUR HOME OR OFFICE
  • Air Filter - 1/2 Inch, Carbon Air Filter


    NOTE: DUE TO A REDUCED WORKFORCE BECAUSE OF THE VIRUS AND BECAUSE 1/2 INCH FILTERS HAVE TO BE CUSTOM MADE, WE ASK FOR YOUR PATIENCE. THERE IS ABOUT A ONE WEEK LEAD TIME ON THESE FILTERS.


    NOTE: We know of no other company that makes 1/2" high quality pleated filters. If you find another website, it is probably one of our websites.


    AIR FILTER - 1/2 INCH, ODOR DEFENSE® AIR FILTER

    ONLINE SINCE 1995 - BEFORE GOOGLE WAS BORN

    WE BEAT ANY PRICE, INSTANTLY! See How Easy It Is

    DON'T SEE YOUR SIZE, DON'T DESPAIR - WE CUSTOM MAKE ANY SIZE

    How often should a one half inch (1/2") filter be changed?.....There are many variables that go into answering that question. Most important is how often you run your system, how dusty your neighborhood
    is, the size of the duct system, the size of your home, etc, etc.....

    Let's face it, no one is going to sit there and figure out all those variables, so the most logical answer is "look at your filter after a couple months and use your judgement. If you want a rule of thumb, then I would say every three months.


    FREE DELIVERY TO YOUR HOME OR OFFICE